Homechevron_rightEngineeringchevron_rightCivil Engineeringchevron_rightAirport Engineeringchevron_rightAirport Engineering

Airport Engineering MCQs

chevron_left Back Page 1/9 chevron_right Next
  • 1. As per ICAO recommendation, minimum width of safety area for instrumental runway should be
  • filter_dramaExplanation
    Answer is : C
  • 2. To cope up high temperature of 196°C, the taxi ways and aprons are constructed with
  • filter_dramaExplanation
    Answer is : D
  • 3. Effective length of a runway is the distance between
  • filter_dramaExplanation
    Answer is : B
  • 4. The size of landing area for multi engine helicopters operating under 1 FR conditions is
  • filter_dramaExplanation
    Answer is : D
  • 5. Total correction for elevation, temperature and gradient for a runway should not be more than
  • filter_dramaExplanation
    Answer is : D
  • 6. Which of the following is used for servicing and repairs of the aircraft?
  • filter_dramaExplanation
    Answer is : B
  • 7. The length of a runway under standard atmospheric conditions is 1800 m. If the actual reduced level of the site is 1200 m, the design length of the runway is
  • filter_dramaExplanation
    Answer is : C
  • 8. The reduced level of the proposed site of an air port is 2500 m above M.S.L. If the recommended length by I.C.A.O. for the runway at sea level is 2500 m, the required length of the runway is
  • filter_dramaExplanation
    Answer is : B
  • 9. For the proposed air port, the survey project provides
  • filter_dramaExplanation
    Answer is : D
  • 10. As per ICAO, for A, B, and C type of airports, maximum effective, transverse and longitudinal grades in percentage respectively are
  • filter_dramaExplanation
    Answer is : A
chevron_left Back Page 1/9 chevron_right Next
leaderboardLeaderboard
  • Rahul Kumar

    191 Points

  • VIKRAM JEET

    54 Points

  • GEETHIKA CHOWDARY

    53 Points

  • sunita saini

    52 Points

  • Zain

    49 Points